Rega Replay
Turntable

New
£259.00
Exclusively available from our Yeovil store
FREE Home Delivery

Rega Replay Turntable

Rega Replay Turntable

A straightforward way into vinyl

Handmade in the UK, the Rega Replay brings together a skeletal plinth, RB110 tonearm and factory-fitted Carbon moving magnet cartridge. It puts the essentials of record playing within easy reach, with simple setup that lets you spend more time choosing music.

Rega Replay turntable playing a turquoise record on a grey surface in patterned sunlight.

Ready for Your First Record

Simple setup and familiar connections

Fit the platter and mat, then push the balance weight to the tonearm's stop point to set the downforce for the supplied cartridge. Connect the RCA leads to an amplifier with a suitable moving magnet phono input or a separate phono stage. Remove the dustcover before powering up, then use the cueing lever to lower the stylus.

Front view of the Rega Replay with its white mat and clear removable dustcover fitted for storage.

Hand-Assembled RB110 Tonearm

Fewer adjustments between you and your music

The RB110 uses Rega's bespoke low-friction bearings and an ergonomically shaped headshell. Bias is set at the factory, so there is no separate anti-skate adjustment to make. Its lift/lower mechanism lets you cue the cartridge onto a record and raise it again at the end of a side.

Close-up of the Rega RB110 tonearm bearing housing, arm rest, cueing mechanism and rear balance weight.

Rega Carbon Cartridge Included

Fitted and aligned at the factory

The Carbon moving magnet cartridge arrives installed, taking cartridge alignment out of the initial setup. Its carbon cantilever and conical stylus are designed for straightforward, dependable record playback. The stylus is replaceable, making it easy to renew this wearing part without replacing the complete cartridge.

Rega Carbon moving magnet cartridge tracking a green record on the Replay turntable.

A Lightweight Skeletal Foundation

Rigid construction, purposeful design

A laminated plinth with a black MDF core provides a rigid, low-mass foundation. The brass main bearing supports the rotating assembly, while the foot design helps limit vibration transfer. Above it, a 23mm phenolic platter adds flywheel effect for speed stability, paired with a custom white mat.

Rega Replay with the main platter removed, revealing its skeletal plinth, sub-platter, pulley and drive belt.

Quiet Drive, Two Playback Speeds

24V motor and Advanced EBLT belt

A low-noise 24V synchronous motor drives the platter through Rega's Advanced EBLT belt. Select 33? or 45rpm by lifting off the platter and moving the belt between pulley steps with the power off. The rear module groups the power switch and input together; use the supplied Rega PS2 power supply.

Rear close-up of the Rega Replay showing the drive pulley, sub-platter, power socket and on/off switch.

Covered Between Listening Sessions

Removable protection and lasting support

The custom dustcover protects the deck between uses and must be removed before powering the Replay. Rega's Lifetime Limited Warranty covers confirmed manufacturing defects, with wear and consumable parts excluded. It provides reassurance for long-term ownership while recognising that parts such as the stylus need periodic replacement.

Close-up of the clear Replay dustcover shaped around the tonearm, with the Carbon cartridge visible beneath it.

General Specifications

Product TypeBelt Drive Turntable
Drive SystemEBLT Advanced Drive Belt
Selectable Speeds33 1/3 and 45 RPM
Speed SelectionManual, via Drive Belt
Motor24 V Low-Noise Synchronous AC Motor
Motor PulleyCNC-Machined Aluminium
PlinthHigh-Rigidity, Low-Mass Skeletal Design
Plinth ConstructionLaminated with Black MDF Core
Main BearingFactory-Sealed Precision Bearing with Brass Housing
IsolationRega Isolation Foot Assembly

Tonearm Specifications

TonearmRega RB110
AssemblyHand-Assembled
BearingsRega Ultra-Low Friction Bearings
Bias AdjustmentFactory Preset, Non-Adjustable
Balance Weight111 g Plug-and-Play Counterweight
Tonearm ConnectivityPhono RCA Cable with Internal Earth via Left Channel

Cartridge Specifications

CartridgeRega Carbon
Cartridge TypeMoving Magnet (MM)
Cartridge InstallationFactory Fitted and Aligned
StylusReplaceable

Platter & Dustcover

Platter MaterialPhenolic Resin
Platter Thickness23 mm
Platter DesignHigh-Mass Flywheel Effect
Platter MatCustom White Mat
DustcoverRemovable Custom Dustcover
Dustcover FeatureAnti-Rotational Device

Power Requirements

Power SupplyRega PS2 100 mA Power Supply
Motor Voltage24 V AC

Dimensions & Weight

Dimensions (W x H x D)415 x 115 x 320 mm
Dimensions NoteWith Dustcover Fitted
Weight2.2 kg

Additional Information

ManufactureHandmade in the UK
WarrantyLifetime Limited Warranty Against Manufacturing Defects

Claim your Rewards online

Joining is always free and takes just seconds! Enjoy receiving our latest offers directly to your inbox, along with other exclusive benefits.